Add snaketesting.json

snaketesting.json

@@ -0,0 +1,101 @@
+esphome:
+  name: snaketesting
+  friendly_name: snaketesting
+  comment: "Automated environmenal control for snake housing"
+  area: "Living Room"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+captive_portal:
+
+web_server:
+  port: 80
+  version: 3
+  ota: false
+
+switch:
+  - platform: gpio
+    pin: GPIO13
+    inverted: true
+    id: relay4
+    name: "Pump"
+    icon: "mdi:water-pump"
+    on_turn_on:
+    - delay: 5000ms
+    - switch.turn_off: relay4
+
+switch:
+  - platform: gpio
+    pin: GPIO12
+    inverted: true
+    id: relay3
+    name: "Heat 1"
+    icon: "mdi:heating-coil"
+    
+time:
+  - platform: sntp
+    id: sntp_time
+    timezone: America/Edmonton
+    on_time:
+    - cron: '0 5 10 * * *'
+      then:
+        - switch.toggle: relay4  
+
+spi:
+  miso_pin: GPIO19
+  clk_pin: GPIO5
+
+sensor:
+  - platform: max6675
+    id: snaketemp1
+    name: "Snake Temperature"
+    unit_of_measurement: "°C"
+    device_class: "temperature"
+    state_class: "measurement"
+    cs_pin: GPIO23
+    update_interval: 30s
+    #on_value_range:
+    #  - below: 31.6
+    #    then:
+    #      - switch.turn_on: relay3
+    #  - above: 33.3
+    #    then:
+    #      - switch.turn_off: relay3
+
+climate:
+  - platform: pid
+    name: "PID Climate Controller 1"
+    sensor: snaketemp1
+    default_target_temperature: 33°C
+    heat_output: relay3pwm
+    control_parameters:
+      kp: 0.0
+      ki: 0.0
+      kd: 0.0
+      output_averaging_samples: 5      # smooth the output over 5 samples
+      derivative_averaging_samples: 5  # smooth the derivative value over 10 samples
+    deadband_parameters:
+      threshold_high: 1.5°C       
+      threshold_low: -1.5°C
+
+output:
+  - platform: slow_pwm
+    pin: GPIO12
+    id: relay3pwm
+    period: 60s
+
+button:
+  - platform: template
+    name: "PID Climate Autotune"
+    on_press:
+      - climate.pid.autotune: pid_climate