esphome:
  name: snaketesting
  friendly_name: snaketesting
  comment: "Automated environmenal control for snake housing"
  area: "Living Room"

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

captive_portal:

web_server:
  port: 80
  version: 3
  ota: false

switch:
  - platform: gpio
    pin: GPIO13
    inverted: true
    id: relay4
    name: "Pump"
    icon: "mdi:water-pump"
    on_turn_on:
    - delay: 5000ms
    - switch.turn_off: relay4

switch:
  - platform: gpio
    pin: GPIO12
    inverted: true
    id: relay3
    name: "Heat 1"
    icon: "mdi:heating-coil"
    
time:
  - platform: sntp
    id: sntp_time
    timezone: America/Edmonton
    on_time:
    - cron: '0 5 10 * * *'
      then:
        - switch.toggle: relay4  

spi:
  miso_pin: GPIO19
  clk_pin: GPIO5

sensor:
  - platform: max6675
    id: snaketemp1
    name: "Snake Temperature"
    unit_of_measurement: "°C"
    device_class: "temperature"
    state_class: "measurement"
    cs_pin: GPIO23
    update_interval: 30s
    #on_value_range:
    #  - below: 31.6
    #    then:
    #      - switch.turn_on: relay3
    #  - above: 33.3
    #    then:
    #      - switch.turn_off: relay3

climate:
  - platform: pid
    name: "PID Climate Controller 1"
    sensor: snaketemp1
    default_target_temperature: 33°C
    heat_output: relay3pwm
    control_parameters:
      kp: 0.0
      ki: 0.0
      kd: 0.0
      output_averaging_samples: 5      # smooth the output over 5 samples
      derivative_averaging_samples: 5  # smooth the derivative value over 10 samples
    deadband_parameters:
      threshold_high: 1.5°C       
      threshold_low: -1.5°C

output:
  - platform: slow_pwm
    pin: GPIO12
    id: relay3pwm
    period: 60s

button:
  - platform: template
    name: "PID Climate Autotune"
    on_press:
      - climate.pid.autotune: pid_climate